Ang Mo Kio Polyclinic – Singapore

Project Name:

Ang Mo Kio Polyclinic Singapore

Featured Products:

ARDEX K 310
ARDEX AF 2365

Situation:

The National Healthcare Group (NHG) has six polyclinics serving a significant proportion of the population in the central and northern parts of Singapore. Its primary healthcare arm, National Healthcare Group Polyclinics (NHGP), wanted to relocate the Ang Mo Kio polyclinic, one of Singapore’s busiest to get a facelift with new facilities and to relocate to better serve patients and the community. ARDEX products have been successfully specified on hundreds of flooring installations within the healthcare sector, including the Ng Teng Feng General Hospital & Jurong Community Hospital, Singapore.

Solution:

ARDEX have developed a system of products specifically designed for fast track flooring installations that minimize downtime and disruption and ensure a perfect finish every time. ARDEX products have controlled drying and hardening properties, allowing the product to be walked on, and the installation of the final floorcovering to be completed, in the shortest possible time. To commence the 5000m2 internal flooring job in Ang Mo Kio polyclinic, the subfloor was professionally prepared and ARDEX K 310 Self-smoothing Compound as Underlayment was applied to level and smoothen the floor to be ready to receive the floor covering. ARDEX K 310 is Green Label certified and therefore ideal for healthcare areas. Furthermore, its fast drying time allows the subsequent work to be started very fast. In order to install the vinyl floor covering, ARDEX AF 2365 Universal Flooring Adhesive was chosen. It is a water-based, solvent-free acrylic, emulsion-based flooring adhesive for permanent internal applications. Like this, the job was completed only after 90 days and the new clinic resumed operations on Monday, 29 January 2018 at its new site as planned.

Park Royal – Singapore

Project Name

PARKROYAL on Upper Pickering Street – Singapore

Installer

ArtMaker Pte Ltd – Singapore Architect WOHA Architects – Singapore

Featured Products

ARDEX DS 40 Impact Sound Reduction and Decoupling System
ARDEX AF 190 Premium Multipurpose Flooring Adhesive
ARDEX AF 2420 Parquet Adhesive ARDEX P51 Porous Substrate Primer
ARDEX SE Flexible Sealant for use in Tile Movement Joints
ABA 310L Self-Leveling Smoothing Compound
ABA 365L Timber Adhesive for Teakwood Floor

Challenge

1,000 square meter installation area including 98 hotel rooms (junior suites, executive suites and presidential suites)
FIIC=58-60 sound insulation requirement for devised hardwood timber finishing
Two-month installation time frame

Situation

The PARKROYAL on Pickering Street Singapore hotel boasts first-rate entertainment and amenities in the Central Business District. The hotel owner desired a peaceful and quiet environment in all guest rooms. Hardwood timber floors met design specifications but sound insulation was required to remediate significant acoustic issues.

Solution

An acoustic consultant conducted a Field Impact Insulation Class test with ARDEX DS 40 Sound Reduction and Decoupling System under hotel room floors. The ARDEX system achieved a result of FIIC 59. ARDEX Singapore Technical Services Department suggested ABA 310L mix with sand aggregate to enhance thickness and smooth the floors surface. ARDEX AF 190 Premium Multipurpose Flooring Adhesive bonded ARDEX DS 40 mat to the substrate. ABA 365L was used to install a layer of 9 mm plywood with 4-6 mm gaps along all perimeter walls and protrusions to allow total isolation of tiles from the adjacent building structure. Fifteen millimeter solid wood strips were installed on the plywood surface using ARDEX AF 2420 Parquet Adhesive. Gaps between the solid wood and perimeter walls were filled with ARDEX SE Flexible Sealant before skirting installation. The beautiful timber wood floors brought a lovely aesthetic and ARDEX products solved acoustic issues in PARKROYAL guest rooms.

Singapore University of Technology and Design – Singapore

Architect:
DP Architects Pte Ltd

General Contractor:
Kajima Overseas Asia Pte Ltd

Installer / Applicator:
Industrial Contracts Marketing (2001) Pte Ltd Featured

Products:

·ARDEX R2SE General Purpose Solvent Free Epoxy Primer
·PANDOMO ATS
·PANDOMO Terrazzo Micro White Challenges:
· Complicated joint profiles design
· 2 arches staircase from level 1 to level 3
· Tight construction schedule of 6 – 8 weeks
· Pandomo Terrazzo installation in main foyer, library, auditorium foyer, visitor center (4700m2)

Problem:
Nestled in the east end of Singapore, Singapore University of Design and Technology (SUDT) needed a functional and splendour but at the same time unobtrusive to the design of the building. The project has to be completed in 6 – 8 weeks under the circumstances that floor trafficking are allowed after a short period as there are other trades working at the same time. During the installation, over 200sqm of post tension concrete slabs that have no expansion or movement joints and cracking on the floor were encountered.

Solution:
After applying ARDEX R2SE,PANDOMO ATS rapid hardening cement was used to build up an unbonded screed application which can be walked on after 6 hours and at the same time develop early compressive strength that reduces the risk of being damaging by other trades and at same time creating an instant floor for stacking materials on site. It saves time on the subfloor preparation. Cement based binder is also use as a safer choice that is environmental friendly and has Class A Fire Rating.

The architect and contractor chose Pandomo Terrazzo Micro which met their demand for design, workmanship and durability in the school. Pandomo Terrazzo Micro is a cement based system that creates a fast track, rapid hardening decorative flooring with a fine Terrazzo finish. It’s ideal to install as it does not have yellowing effect after exposing to UV light especially with a light colour terrazzo floor that is chosen. Most importantly, It can be ground right after 24 hours which are both crucial characters that allows the project to be completed in very short time.

ARDEX Pandomo applicator has installed a unique and splendour floor, just as the owner requested.

The Line @ Tanjong Rhu – Singapore

Project Name

The Line @ Tanjong Rhu, Singapore

Installer/Applicator

SL Brilliant Construction Pte Ltd, Singapore

General Contractor

SL Brilliant Construction Pte Ltd, Singapore

Architect

Mode Architects, Singapore

Featured Products

ARDEX X 29
ARDEX X77
ARDEX X 52

Challenge

ARDEX has been chosen for the whole tiling work for the prestigious new residential development “The Line @ Tanjong Rhu”. The area is approx. 30,000m2, with 20 storeys and 130 units in total. Environmentally friendly, sustainable building products with Green Label certification were required. The competition with other suppliers was strong.

Situation

“The Line” is a newly built condo, near the East Coast and marine district in Singapore. The installation work has been done from July 2015 to October 2016.

Solution

ARDEX managed to secure the project by introducing its unique tile adhesives:

The Premium Microtec flexible Wall & Floor Tile Adhesive ARDEX X 77 for the external swimming pool area
The Green Label certified tile adhesives, ARDEX X 29 for external tiling and ARDEX X 52 for internal tiling

IKEA Restaurant – Singapore

Installer and General Contractor:

Entrust Organisation Pte Ltd

Featured Products:

ARDEX K 310 Self-smoothing compound as underlayment
ARDEX AF 190 Premium Multipurpose Flooring Adhesive

Challenges:

ARDEX was chosen for the whole vinyl installation work for the prestigious IKEA Restaurant at Alexandra, Singapore. The area is approximately 2,000m
Environmentally-friendly, sustainable building products with Green Label certification were required. The competition with other suppliers was strong.

Problem:

IKEA is a multinational group that designs and sells ready to assemble furniture, kitchen appliances and home accessories. The IKEA Restaurant has your appetite taken care of, at equality appetizing prices. The flooring installation work was done in two phases and completed in May 2017.The applicators were required to complete the project in a short time frame that allowed only two weeks for both removing the existing vinyl and to install the new floor covering. Night work was carried out in order to avoid affecting the restaurant’s daily operations and to meet the time frame as requested from the customer.

Solution:

ARDEX managed to secure the project by introducing its unique Flooring System, both products are certified with the Singapore Green Label: ARDEX K 310 is a rapid-setting compound used to prepare interior floors prior to laying the vinyl covering, and ARDEX AF 190 is a water-based, solvent-free adhesive for permanent internal vinyl installations.

Marina Square, Wentworth Point

APPLICATOR: Team Members’ Project
GENERAL CONTRACTOR: Billbergia

The Marina Square Shopping Centre is a popular retail precinct located at Wentworth Point, one of the most prime spots in New South Wales. With many specialty and brand name stores, it was important that they had excellent grouting and tiling solutions in-line with the stunning design of the area.
The client required durable tiling, adhesive and epoxy grout solutions for the shopping centre main floor that didn’t compromise on aesthetics. The contractor opted for the distinctive and popular look of terrazzo tiles (400 x 400 x 20mm with 3mm joints) for this project as they could be put down quickly and provide a consistent, hard wearing flush finish once ground and polished. ARDEX provided a solution consisting of ARDEX X 18 tile adhesive and ARDEX EG 800 F commercial epoxy system. Combining these products ensured a high quality finish.

Challenge
As a high traffic area, the shopping centre needed to have its flooring and construction done quickly with minimal disruption to leasees and patrons.
The sheer size of the area (3400 square metres) meant that the project required a solution that could be laid quickly, in a short timeframe and in a way that didn’t take excessive manpower.

Solution
ARDEX was specified for the tiling throughout for its rapid drying and non-slump properties.
The adhesion used for this project comprised of ARDEX EG 800 F Flowable epoxy grout and ARDEX X 18, a fibre reinforced flexible non-slump wall and floor tile adhesive. This was the ultimate solution because it contains specially developed fibres that add to the high compressive strength required for such a high traffic area.

Unique Elements
Often, grout needs to be applied individually into each tile joint. However, for such a large area and quick turnaround time needed, the ARDEX EG 800 F was ideal for this application method because it meant that the entire area could be flooded and ground back afterwards, ensuring an impressive amount of surface area was covered in a short amount of time.

Another aspect that made this a favourable choice is the broad coverage. Each kit is estimated to cover approximately sixteen square metres.

It is also extremely durable, stain proof and waterproof making it the best choice for the busy levels of traffic in the shopping centre.

The Bombora, Cronulla

APPLICATOR: Soleace Waterproofing
ARCHITECT: Vic Lakes Architects

The Bombora in Cronulla, NSW, are high end apartments situated at the edge of the beach. Positioned in an affluent area, neighbouring homes are often sold in excess of several million dollars.

The building features cutting edge architectural feats and promises a lifestyle for residents that is only often dreamt about. It features a sought-after penthouse balcony complete with swimming pool.

Given the luxury nature of these residences, a premium quality service and product were required.

ARDEX was selected by Soleace Waterproofing as the supplier of choice for this project, due to SystemARDEX offering and reliability of products and service.

Challenge
Despite the awe-inspiring views and close proximity to the shore, the location can pose a number of problems for the exterior of the building. Namely, the building and rooftop are often exposed to high winds and salt content in the air as well as other intense weather conditions such as high UV exposure.

Unique Elements
The unique elements comprised in this project was the need to complete the job efficiently and with durable and reliable products to withstand the distinctive environmental conditions, all without compromising on the elite aesthetic that the property needed to retain. Not only that, but the rooftop area was sizable for a residential project, coming in at 350 square metres.

Solution
The ARDEX products used were:

ARDEX WPM 717 – WeldTec Fleece-backed Waterproofing Membrane which is a weldable and fleece backed waterproofing membrane ideal for uneven substrates. It provides excellent resistance to ageing from heat, sunlight, atmospheric pollution and ozone. It’s also beneficial in horizontal or vertical applications for waterproofing decks and roofs that have residual moisture or are not perfectly flat and smooth.

ARDEX WPM 1000 – WeldTec External Undertile Waterproofing Membrane
This product is a versatile, external undertile waterproofing membrane ideal for use on balconies, roofs, decks, under tiles, pavers, and cavity door flashings and is known for its durability.

ARDEX WPM 002 is a tough, fast-drying two-component waterproofing membrane specifically designed for use under tiles. The product has been uniquely formulated with synthetic microfibres to increase its strength and eliminate the need for a separate reinforcement mat. Due to the high-end nature of the bathrooms and internal wet areas, ARDEX WPM 002, with its proven track-record in the Australian market, was the product of choice.

ARDEX WPM 300 two-component, water-based epoxy polyamide was the ideal membrane and barrier coating which is ideal for damp or drying concrete and internal wet areas, again selected to meet the demands of the humid environment.

Box Hill Pool Refurbishment

ARCHITECT: A1 Office Fitouts
CONTRACTOR: Bravada Building Services

Challenges:
The size of the project coupled with the tight timeframe resulted in various challenges for the contractor, Bravada Building Services. Firstly, the contractor was given only seven weeks to complete the pool refurbishment project, which is located between Spotlight and Anaconda in the Spotlight Retail Centre. In all, nine different ARDEX products were used, including 570sqm of WPM 002 Waterproofing Membrane and 540sqm of X 17 tile adhesive, FG 8 grout on the pool surrounds, change rooms, foyer and mosaic walls. Also used was 285sqm of WPM 405, an ARDEX additive that enhanced the strength of the screed.

ARDEX products were selected as they are completely compatible, easy to use, as well as being supported by a dedicated Technical Support Team and manufacturer’s guarantee.

Problem:
Bravada Building Services were confronted with a significant challenge as the pool surround was quiet shallow for the screed (minimum thickness and achieving minimum fall requirements 1:100). Due to the thickness issues and the Scyon installation patterns, Bravada Building Services decided to use a self-supporting screed which included a slip sheet with expanded metal reinforcing. ARDEX WPM 405 additive was also used to increase the compressive strength, ultimately giving the contractor’s peace of mind.

The tiling also resulted in a challenge due to tile choices and the layout of patterns. However, the reliability and consistency of ARDEX X 17 tile adhesive provided the contractors with the confidence they needed. ARDEX X 17 was installed in multiple locations and environments such as the pool deck surround, change rooms, showers and foyer areas.

Solution
With a project of this magnitude and complexity it was crucial that all products and techniques selected were not only suitable for the environment but were also compatible. Given the confidence in the ARDEX range of products, Bravada Building Services had no hesitation in using an ARDEX System for this project.

Unique Elements:
Without doubt, ARDEX WPM 002 and WPM 405 were the two key products that made this project such a success. However, ARDEX does not believe that their responsibility ends with the manufacture of innovative and specialist solutions. ARDEX’ Sales Representative, Brett O’Loughlin, provided Bravada Building Services with technical support before, during and after the installation. The support provided from the ARDEX Team, including in-depth training on a huge variety of products and techniques all influenced the outcome of this installation.

The Elan, Sydney

CONSULTANT: Diagnostech
BUILDER: Biltbeta

At 136 meters, 40 stories, The Elan is one of the tallest residential apartment blocks in Sydney. The building is also situated in the highest part of Kings Cross, 45 meters above sea level. Built in 1997, there are 18,200 cubic meters of concrete and 2,550 tonnes of reinforcing steel in The Elan.

Challenge
20 years after it was built, The Elan required a complete façade overhaul that included crack and joint repairs, she-blot repairs, spalling concrete, render repair, concrete crack injection, balustrade post repairs and façade coating systems. Furthermore, several balconies required re-waterproofing. ARDEX Australia in conjunction with the consultant specified a wholistic solution that included a complete, fully warrantable SystemARDEX approach. Works commenced in May 2016 and are expected to be completed early 2018. The size of the building makes it one of the largest façade restoration projects currently in Sydney.

Solution
Before work on the façade coating could start, concrete repairs were essential on parts of the building. Spalling concrete and she-bolt hole repairs were rectified with ARDEX BR 345 MICROTEC® Fibre-Reinforced, High Resistivity, Polymer-Modified, Structural Concrete Patching and Repair Mortar and ARDEX BR 120 FC Polymer-Modified, Fibre-Reinforced Fairing Coat.

Areas that were affected by cracks in concrete were reinstated by using ARDEX RA 88 Multi-Purpose Epoxy Repair Adhesive to adhere ARDEX T-Ports, a unique pressure injection port system, before injecting ARDEX RA 142 Super Low Viscosity Structural Concrete Crack Injection Epoxy for hairline cracks and ARDEX RA 144 Low Viscosity Structural Concrete Crack Injection Epoxy for cracks that were wider than 1mm. For render repairs, ARDEX WR Prime Performance Enhancing Polymer Primer & Additive was used in conjunction with ARDEX WR 100 General Purpose Acrylic Render.
There was a large number of joints that needed to be repaired and re-sealed. Throughout the project, a range of ARDEX sealants were used including ARDEX CA 20 P Multipurpose Construction Adhesive and Sealant, ARDEX RA 030 One Component, Moisture-Curing Expansion Joint Sealant and ARDEX RA 040 Polyurethane Joint Sealant.

The specified façade coating system included the use of two coats of ARDEX WPM 300, a two-component water based epoxy polyamide membrane/barrier coating, followed by two coats of ARDEX WPM 330 External Anti-Carbonation Façade Membrane.

Unique Elements
Due to the size of the structure, there was a significant amount of product required to coat the façade. In total, there are approximately 35,000 litres of WPM 300 and an additional 35,000 litres of WPM 330 that were used for the façade coating system.

Dennis Stephenson, Managing Director of Diagnostech Pty Ltd provided the following comment: “We selected ARDEX at the design stage because ARDEX were really the only supplier who offered the full system warranty. The project required compatibility between all products including sealants, render repairs, concrete repairs and coatings. This ultimately provided a level of comfort to the client, knowing that this full system compatibility had been considered and agreed between Consultant, Supplier and Contractor.

We also appreciated the fact that ARDEX were willing to assist Diagnostech with ongoing quality control inspections as the works progressed. This has certainly contributed to what has been a very successful façade refurbishment project.”

MYER Shopping Centre, Cairns

The specification of 10,000m of timber flooring at Myer Cairns, a market leader in Australian retailing, required a guaranteed system to overcome the high moisture levels in the concrete slab.

ARDEX WPM 300, ARDEX K 15 and ARDEX E 25 provided the system.

A tight construction schedule, as is often the case with new shopping centres, did not allow for the natural drying of the concrete slab. In addition the air-conditioning could not be operational at the time of installation of the timber flooring (a recommendation of both Australian Standards and the flooring manufacturers).

Recognising that the concrete moisture content was over the allowable limit, the specification was written to install ARDEX WPM 300, topped with a 4mm layer of ARDEX K 15. The former, as the name suggests, prevents moisture in the slab from travelling to the floor covering and causing it to warp or delaminate. ARDEX K 15 provides a smooth flat porous surface for the conventional laying of floor-coverings and also protects the moisture barrier against damage.

A number of years and millions of footsteps later the timber flooring continues to look great, testimony that the system works.