QUICSEAL 172 is a single component hydrophobic polyurethane injection resin, which stops water ingress reacts with the water present in the injection area to form a dense, closed cell foam in which water will not pass through. In an unconfined environment, its expansion rate can be up to 20 times
With the addition of the catalyst component – QUICSEAL 171, the reaction time can be reduced to approximately 1 minute
Filling of gaps and cavities in masonry and concrete in case of water ingress
To cut off water flow through concrete joints or cracks
It is recommended to flush the crack with water prior to injection to improve the subsequent penetration of the injection resin into thick wall. Transfer the mixture to the hopper and begin the injection at the point of highest resistance to ensure good penetration. Start from the lowest point on a vertical crack and the narrowest area on a horizontal surface. The packers shall be removed within 24 hours and the holes shall be patched. If necessary, remove the excess cured grout that flowed out from the crack using a grinder.
Color : Brown
Pack size : QUICSEAL 172 is available in 20kg pail