QUICSEAL 102ECO

Application

Stir QUICSEAL 102ECO manually before application. For horizontal and vertical surfaces, a roller, brush or spray gun, may be used to apply the membrane. Care must be taken to ensure that air is not entrapped in the membrane.

Pre-treat QUICSEAL 102ECO on all corners, upturns and pipe penetrations with a brush followed by application to the general areas and allow to dry.  Allow membrane to dry for approximately 2 hours before application of the second coat.

Apply the 2^nd coat at right angles to the last coat of waterproofing membrane, allow it to cure for 24 hours before proceeding to conduct any flooding test.

Colour : Grey

Recoat Time : 2 hours

Coverage

Coverage                              :   1.3-1.5kg/m²/2 coats

Wet film thickness/ coat      :   1.2 ± 0.1mm

Packaging

Pack size                               :   24 kg pail