ABA Multipurpose Primer & Additive

In general, the surface being adhered to must be clean, dry, free of dust, dirt, oil, grease and contaminating materials. New brickwood and walls should be left at least 7 days prior to rendering.

Apply with roller, brush or spray in two or more thin coats till desired thickness is achieved. Ensure that the coating is applied evenly at the recommended dry thickness.

Recommend minimum DFT is 500 – 800 microns after 2 coats. For WFT apply 500 microns +/- 100 microns per coat. Recoating interval is approx. 45 minutes from last coat. For final coat, allow UNDERTILE WATERPROOFING to cure for at least 4 hours before screeds or render can be laid.

COVERAGE

5l of UNDERTILE WATERPROOFING will cover approx. 5-7m² for 2 coats.