The final coverage rate for all surfaces should be a total of 1.5 m2/L (3.0 m2/L wet applied per coat) to achieve optimum properties.
In the event that this coverage rate is not achieved in two coats, further coats should be applied to achieve a total uniform coverage rate of 1.5 m2/L e.g. 300 micrometer dry film thickness.
MIXING
Part A and Part B should be individually mixed to form a homogeneous component.
Thoroughly mix the two components in the ratio of 1 : 1 by volume until a homogeneous blend is obtained. Only mix as much as may be used within pot life and avoid excessive aeration during mixing.
APPLICATION
Floors: Spread the material using a squeegee or stiff nylon broom to achieve coverage and finish using a long nap roller.
Walls: Apply the product by roller or spray taking care to achieve the required coverage.
COVERAGE
The final coverage rate for all surfaces should be a total of 1.5 m2/L (3.0m2/L wet applied per coat) to achieve optimum properties.
If this coverage is not achieved in two coats, further coats should be applied.
