General Construction
Products
Products in General Construction
-
ARDEX CA 20 P
Multipurpose Construction Adhesive and Sealant
-
ARDEX 291
One Component, Non Sag Polyurethane Sealant
-
QUICSEAL FABRIC
Polyester non-woven Geo-textile (60gr/m2)
-
QUICSEAL 720
Chopped Strand Fibreglass Mesh
-
QUICSEAL 718
Fibremesh
-
QUICSEAL 714
Non Slip Aggregate
-
QUICSEAL 713
Form Strike
-
QUICSEAL 705
Guard-Protection for Marble/Tiles/Parquet etc
-
QUICSEAL 703
PVC Waterstop
-
QUICSEAL 702
Hydrostop BR
-
QUICSEAL 646
Hydro-adhesive
-
QUICSEAL 538
Paver-Sil
-
QUICSEAL 536
Paver-Top E
-
QUICSEAL 535
Paver-Top N
-
QUICSEAL 507WE
Cure Shield WE
-
QUICSEAL 507
Cure Shield WB
-
QUICSEAL 412
Step Nosing
-
QUICSEAL 411
uPVC L-STRIP
-
QUICSEAL 410
Plastering Corner Ruler
-
QUICSEAL 409
uPVC GROOVE JOINT
-
QUICSEAL 408
uPVC TILE TRIM
-
QUICSEAL 407
uPVC EXPANSION JOINT
-
QUICSEAL 406
Polycel-Type K
-
QUICSEAL 405
Water Drip Line Former / Crack Inducer Triangle
-
QUICSEAL 404
ML Closed Cell Backer Rod
-
QUICSEAL 402
Fibreboard
-
QUICSEAL 401
Contro-Crac
-
QUICSEAL 218
Elastomeric Pavement Joint Sealant
-
QUICSEAL 210
One Part Hybrid Sealant
-
QUICSEAL 208
Two Part Polysulphide Joint Sealant
-
QUICSEAL 207
Manhole Cover Seal
-
QUICSEAL 203
Bitumen Compressible Sealant Strip
-
QUICSEAL 202
Overlapping Super 0311 Tape
-
QUICSEAL 201
One Part Moisture Cure P.U. Sealant
-
QUICSEAL 704
Extruded Polystyrene Foam “HD”
Products in General Construction ARDEX General Construction
Products in General Construction QUICSEAL General Construction
-
QUICSEAL FABRIC
Polyester non-woven Geo-textile (60gr/m2)
- Simple application, Excellent Tear Strength
- Good Absorption and Compatibility with PU Coatings
-
QUICSEAL 720
Chopped Strand Fibreglass Mesh
- Good Wetting Properties
- Improves Tensile Strength of Liquid Applied Waterproofing Membrane
-
QUICSEAL 718
Fibremesh
- Easy To Use and Handle
- Good Wetting Properties
-
QUICSEAL 714
Non Slip Aggregate
- Provides a Skid Resistance and Abrasion Resistance Surface
- Moh Hardness 9
-
QUICSEAL 713
Form Strike
- Reduces Blow Hoes In Concrete Face
- Economical – Provides High Coverage Rates Due To Its Low Viscosity
-
QUICSEAL 705
Guard-Protection for Marble/Tiles/Parquet etc
- Reusable
- Light Weight, Easy Transportation
-
QUICSEAL 703
PVC Waterstop
- Easy On Site Jointing
- Factory Jointed Intersection Pieces Available
-
QUICSEAL 702
Hydrostop BR
- No Adhesive or Cutting Required for Overlapping
- Excellent for Application to Rough Concrete Surfaces
-
QUICSEAL 646
Hydro-adhesive
- Formulated Water-based Adhesive for Bonding A Wide Range of Substrates
-
QUICSEAL 538
Paver-Sil
- Improve Abrasion and Impact Resistance
- Improve Resistance to Oil and Grease Penetration
-
QUICSEAL 536
Paver-Top E
- Increased abrasion and impact resistance
- Provides an extremely strong, hard wearing, abrasion and impact resistant surface
-
QUICSEAL 535
Paver-Top N
- Forms Monolithic Bond with Base Concrete
- Provides A Hard, Abrasion Resistant Surface
-
QUICSEAL 507WE
Cure Shield WE
- Improves The Quality Of The Applied Concrete Or Cement-sand Substrate
- Eliminates the Need for Damp Hessian or Polyethylene Sheets for Curing
-
QUICSEAL 507
Cure Shield WB
- Eliminates The Need for Damp Hessian or Polyethylene Sheets for Curing
- Supplied Ready for Immediate Use
-
QUICSEAL 412
Step Nosing
- ideal for use as protection to edges of steps for hard coverings such as Tile, Stone & Concrete flooring, etc
-
QUICSEAL 411
uPVC L-STRIP
- Excellent weather resistant properties
- Simple installation, does not support combustion
-
QUICSEAL 410
Plastering Corner Ruler
- Excellent weather resistant properties
- Perforated patterns in Plastering Corner Ruler / Plaster Stop sections ensure maximum anchorage under the plaster
-
QUICSEAL 409
uPVC GROOVE JOINT
- Light weight – easy to install
- Can be painted over directly with emulsion or solvent based paint
-
QUICSEAL 408
uPVC TILE TRIM
- Replace the conventional use of cove tiles that are prone to chipping and staining
- Easy to install with no sharp edges
-
QUICSEAL 407
uPVC EXPANSION JOINT
- Easy to install / save time – expansion joints are laid progressively during tile installation
- Perforated patterns in QUICSEAL 407 provide secure anchorage under the tile or screed
-
QUICSEAL 406
Polycel-Type K
- Rot proof and non-absorbent, Bitumen free
- Compressible – accepts movement with low load transfer
-
QUICSEAL 405
Water Drip Line Former / Crack Inducer Triangle
-
QUICSEAL 404
ML Closed Cell Backer Rod
- Lightweight, closed cell structure
- Inert and compatible with cold-applied sealants
-
QUICSEAL 402
Fibreboard
- excellent compression / recovery
- bitumen impregnated, high quality
-
QUICSEAL 401
Contro-Crac
- Prevent concrete chipping as these can be potential hazards to jet suction
- Reduces the risk of random cracking in concrete
-
QUICSEAL 218
Elastomeric Pavement Joint Sealant
- Jet blast resistant & UV-stable
- Resistant to extreme climate/weather conditions
-
QUICSEAL 210
One Part Hybrid Sealant
- Excellent long term durability
- Fast cure & Low VOC and odorless
-
QUICSEAL 208
Two Part Polysulphide Joint Sealant
- Fuel, oil and hydraulic fluid resistant
- Provides a permanent watertight seal
-
QUICSEAL 207
Manhole Cover Seal
- Adheres to all surfaces like metal and concrete
- Has a quick release from the release paper & Ease of compression during installation
-
QUICSEAL 203
Bitumen Compressible Sealant Strip
-
QUICSEAL 202
Overlapping Super 0311 Tape
-
QUICSEAL 201
One Part Moisture Cure P.U. Sealant
- high durability
- non-slump on vertical surfaces
-
QUICSEAL 704
Extruded Polystyrene Foam “HD”
- Homogenous structure and uniform density distribution
- Excellent compressive strength
General Construction
ARDEX-QUICSEAL offers an extensive range of products for every installation challenge to increase efficiency regardless of application. We aim to provide high-quality building materials and accessories as well as providing world-class customer service with that comes technical expertise and training. This minimizes turnaround times, costs and risks on the job site!
What are joint sealants?
Joint sealants are materials used to seal joints and gaps in construction projects, providing a flexible and waterproof barrier that accommodates movement and prevents the ingress of elements like water, air, and chemicals.
Why are sealants important in construction?
Sealants are crucial in construction for ensuring structural integrity, preventing water damage, and maintaining energy efficiency by sealing off air leaks. They also enhance the aesthetic appearance by providing a clean, finished look to joints.
What types of sealants are typically used in construction?
The most common types include polysulphide, polyurethane (PU), silicone, and acrylic sealants. Each type has specific properties suited for different applications.
What is a polysulphide sealant?
Polysulphide sealant is a type of elastomeric sealant with excellent chemical and water resistance, making it ideal for sealing joints in areas exposed to harsh conditions.
What is PU sealant and where is it used?
PU (polyurethane) sealant is a versatile sealant known for its strength, flexibility, and resistance to weathering. It is commonly used in construction for sealing expansion joints, cracks, and gaps in buildings and other structures.
Can I use the same sealant for all types of joints?
No, different joints and materials require specific types of sealants based on movement, exposure, and compatibility. For example, polysulphide sealants are preferred for joints with high movement or exposure to chemicals, while PU sealants are better for areas needing high durability and strength.