Prime the surface to be reinforced with an appropriate primer or base coat. Allow to dry. Apply a layer of the chosen protective coating by brush or spray over the clean surface of the structure being treated. Immediately, unroll QUICSEAL 720 over the coated surface and thoroughly embed with a brush or squeegee. Upon drying, apply second or subsequent coats till the required thickness is achieved. Provide a minimum of 75mm and 100mm end and side lapping respectively. It is important that QUICSEAL 720 is adequately smoothened across the surface to avoid and wrinkling effect. This can be achieved using the brush to even out the filament strands during application.
