Pour QUICSEAL 640 (Part A) & (Part B) into a container. (Refer to technical data for mixing ratio for part mix). Mix QUICSEAL 640 with a clean batten for about 3 – 5 minutes until a homogenous mix is obtained. Allow the mixed resin to stand for 3 – 5 minutes until the mixture is warm to the touch.
Pour the clean and dried pebbles into the mixed QUICSEAL 640. Using a trowel, mix QUICSEAL 640 with the pebbles until they are evenly coated.
Using a trowel, spread the QUICSEAL 640 coated pebbles onto the prepared substrate.
Allow the binded pebbles to cure for 6-12 hours before allowing light foot traffic.
Color : Clear
Coverage : Approximately 0.8 kg of QUICSEAL 640 is required to bind approximately 10mm pebbles / stones to cover an area of approximately 1m2.
An additional coat of QUICSEAL 640 @ an approximate coverage of 0.4kg/m2 over the binded pebbles is highly recommended.
Pack size : 5kg set